Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: Allan964
Joined: February 2012
Visits: 88
Last Active: December 2012
Roles: Member
Posts: 32

Allan964

V12VRX Oe Oval Edition Kit
Interesting bout the SS mate, was planning on emailing you about the 2013 spec car. Any other changes or purely for lipo adaption?

Comment by Allan964 November 2012 permalink
New to this...
Against previous advice i would get the V60 speedo over the viper oval, you will only upgrade to it anyway.

Comment by Allan964 November 2012 permalink
New G2 GTR Sensored Brushless breaks cover
Looking forward to having a shot as i am going to put a circuit car together shortly so keep me posted.

Comment by Allan964 October 2012 permalink
Wheels too tight on front axle...Solutions?
Almost every set of revo's i buy are like that mate, as previous i just stick a reamer in them. One thing to note, don't go too far or you will end up with a lot of slop. The wheels will develop this naturally over time anyway but you do…

Comment by Allan964 October 2012 permalink
The screaming Mardave of doom!
Are you running a bearing front end? If not the wheels sometimes expand and squeal on the stubs, try different front wheels or a bit of oil on the stub.

Comment by Allan964 October 2012 permalink
1/8 Old i.c. Stock cars
Duke - I raced these for about 8 years, cars are still being sold, my Dad actually sold both our Mardave stock cars around a year ago, we had kept them in the shed incase we ever raced again.

Comment by Allan964 August 2012 permalink
V8AB & V8ABC Alloy Pod now In Stock
Really like these.

Comment by Allan964 June 2012 permalink
What is the best way to clean out a G2 brushed motor
I can't find the topic mate so here goes: After each race i do this: - Contact cleaner onto a cotton bud, clean the comm. - Dry with a cotton bud - Brasso on a cotton bud, clean the comm - Wipe excess brasso with a new cotton bud - C…

Comment by Allan964 April 2012 permalink
Mardave VRX SS
That will partly be due to the stiffness of the new parts. If its lifting, harden the rear suspension a but at a time. I also run an offset battery box.

Comment by Allan964 April 2012 permalink
Mardave VRX SS
I use a 46 outside front, pink med inside but you could try a jap 50 on the outside front.

Comment by Allan964 April 2012 permalink
What Shell do you want Next
Wide arch K11 Nissan micra hotrod :D

Comment by Allan964 April 2012 permalink
Mardave Project X Yes there is going to be an all NEW Mardave V12
V12 Shadow

Comment by Allan964 April 2012 permalink
Mardave Project X Yes there is going to be an all NEW Mardave V12
V12 Carpet Assassin V12 Mercenary V12 Raptor V12 Stealth

Comment by Allan964 April 2012 permalink
Mardave VRX SS
I personally don't use contacts so I can't comment. I'm not a fan if running different compounds on the rear either. Could you take a photo of your back suspension and email it to me? Allan1875 at virginmedia.com, or post it on here…

Comment by Allan964 April 2012 permalink
CMSCC Saloon 4 Cell A Final Video
We find out in 5 weeks time.

Comment by Allan964 April 2012 permalink

More Comments

Website design by TKStarley

Howdy, Stranger!

About

Top Posters

Allan964